This type of lifting beam is designed as a folding crossbeam. The lifting beam is designed with a double pullout per arm, allowing the attachment points to be adjusted in the length/width. A 4-part sling must be used between the lifting beam and the crane hook. Other lengths and working loads can be manufactured upon request.
Design: Lightweight welded beam construction providing good torsional stiffness. TRIPLEX model K is special designed to fit in the side direction of a truck.
Proof load: Usually 1,5 x WLL.

  • Material: Beam and plate of high-strength structural steel.
  • Marking: CE-marked, Working load limit (WLL), manufacturer, serial number, year of manufacturing, etc.
  • Finish: Yellow painted. Other treatments available on request.
  • Note: Top sling, separate slings and other accessories to be ordered separately.
Double pull-out
Select a row from the table below, then click the add to quote button
Part Code WLL
Type Beam length L Min.
Beam length L Max.
L 1 max.
13.4065-02504200 2.5 Triplex 2,5 3,6 6,0 4,265 196
13.4065-06004510 6 Triplex 6K 2,30 4,65 3,250 197
13.4065-06004500 6 Triplex 6 3,9 6,5 4,520 239
13.4065-10004510 10 Triplex 10K 2,25 4,4 3,160 285
13.4065-10004500 10 Triplex 10 4,0 6,4 4,525 343
13.4065-20004510 20 Triplex 20K 2,25 4,4 3,160 465
13.4065-20004500 20 Triplex 20 4,0 6,4 4,545 591
The WLL stated in the table is based on a maximum top swing angle og 90°.

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.