Electric winch with heavy duty gearbox. Also available as pneumatic (piston or gear motor) or hydraulic versions.

Features:
IP 54 400 V AC/3-phases/50 Hz braked motor
Steel drum with cable fixing point at flange
Two drum supports
Double layer 2-component conservation according ISO 12944 category C2-Low, colour RAL 5010
FEM/ISO class: T3-L3-M4

Available winch options:
IP 56 TENV cast iron motor for marine applications
Explosion-proof motors
Protective steel motor cover
Drum pressure roller
Band brakes (manual or fail-safe automatic)
Manual disengaging clutch
Alternative speeds
Alternative supply voltages
Drum guards
Spooling gears
Grooved drums
Manual emergency crank
Slip ring mounting
Alternative drum dimensions/split drums/additional rope anchors/etc.
Warping head
Marine/offshore coating systems

Available control options
Control box IP 55 with push-buttons and emergency stop built acc. to NEN 1010
Control box IP 66 with low-voltage IP 65 remote control built acc. to NEN 1010
Load limiter (required by CE for applications exceeding 1000 kg WLL)
Frequency inverter for variable speed control
Wireless radio remote control systems
Limit switches (electric, pneumatic)
Slack wire switches (electric, pneumatic)
Proportional local or remote control valve (pneumatic or hydraulic)

Winch type Speed 1st layer m/min. WLL 1st layer
ton
Recomm. rope dia.
mm
WLL 5th layer kg Speed 5th layer m/min. Drum cap. 1st layer
m
Drum cap. 5th layer
m
Motor power
kW
CAD
SB 300 E 9,5 1,200 10 845 14 26 168 2,2
SB 301 E 7 2,100 12 1,435 10 24 157 3
SB 303 E 11 2,500 14 1,740 16 26 165 5,5
SB 304 E 9 3,100 14 2,160 13 26 165 5,5
SB 305 E 7 4,000 16 2,770 10,5 25 161 5,5
SB 306 E 7 5,500 18 3,970 10 28 181 7,5
SB 307 E 12 7,000 22 4,960 17 26 171 15
SB 309 E 14 9,000 26 6,285 19,5 24 163 22
SB 310 E 8 12,000 28 8,460 12 24 168 18,5
SB 311 E 7 16,000 34 10,655 11 19 144 22
SB 313 E 6 20,000 38 13,610 8,5 19 151 22
SB 314 E 6,5 24,000 40 16,170 9,5 19 154 30
SB 315 E 6 30,500 44 20,800 9 19 151 37
SB 316 E 6 37,000 48 24,570 9 17 141 45

1st layer = inner layer
5th layer = outer layer

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download