General: We recommend this type of pillar jib crane for lifting and handling of lightweight loads as well as for loads, which must be lifted close to the pillar. The jib arm is designed as an “elbow arm” which makes handling extremely easy and ergonomically correct in the full range of the crane. Our standard program has been designed in load groups from 30 kg up to 125 kg.
This type of jib crane is designed for permanent mounting of a lifting device and we recommend a vacuum lifter or a compressed air lifter with weight balancing.
Electrical chainhoist: When using an electrical chain hoist we can offer a wide selection of hoists as well as electrical and manual trolleys. We recommend an electrical trolley for this type of crane.
Design: Lightweight welded beam construction providing good torsional stiffness.
Proof load: Usually 1,5 x WLL.

  • Material: Beam and plate of high-strength structural steel.
  • Marking: Working load limit (WLL), CE marking, manufacturer, serial number, year of manufacturing, etc.
  • Finish: Yellow painted. Other treatments available on request.
Part Code WLL
ton
Type L
mm
L1
mm
H
mm
H1
mm
H2
mm
Ø D
mm
CAD
13.2052-40302000 0.03 SK-K-30/2 2,000 950 4,000 500 3,880 430
13.2052-40303000 0.03 SK-K-30/3 3,000 1,450 4,000 500 3,880 430
13.2052-40502000 0.05 SK-K-50/2 2,000 950 4,000 500 3,880 430
13.2052-40503000 0.05 SK-K-50/3 3,000 1,450 4,000 500 3,880 430
13.2052-40802000 0.08 SK-K-80/2 2,000 950 4,000 750 3,840 430
13.2052-40803000 0.08 SK-K-80/3 3,000 1,450 4,000 750 3,840 430
13.2052-41252000 0.125 SK-K-125/2 2,000 950 4,000 750 3,840 430
13.2052-41253000 0.125 SK-K-125/3 3,000 1,450 4,000 750 3,840 430

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download